Wanted - Cubase Audio CBX

[guest3186]

Hi there, i am after a working version of Cubase Audio CBX to run on my TT.
I have two Yamaha CBXD5 units that i would like to get going with my TT.

So far all i have been able to get is a corrupt version of Cubase audio CBX that keeps on bombing out on the TT.

Thank you,

kind regards,

blaylok

[Lukas Frank]

... die Version vom Steinberg FTP Server hat er schon und die Bombt !

[Lukas Frank]

... maybe it need a Steinberg ASCI/SCSI II Interface on the Atari TT too ?

http://www2.yamaha.co.jp/manual/pdf/emi/english/synth/CBXD5E1.pdf

http://forum.atari-home.de/index.php?topic=9345.msg65722#msg65722

[Arthur]

3 Cubase Audio & Atari TT System
An overview
In this system the CBX-D5 is used with an Atari TT computer and the supporting
software is Cubase Audio by Steinberg.
What you will need
1) The CBX-D5, a power cable, two MIDI cables, a 50-way SCSI cable, and a SCSI
terminator (all these except for one MIDI cable are provided with the CBX-D5).
2) An Atari TT computer and an Atari video monitor.
3) Steinberg’s Cubase Audio software (Atari version).
4) A SCSI hard disk and a 25-pin D-SUB to 50-way SCSI cable.
Making the connections
1) Connect the Atari computer’s “MIDI OUT” connector to the CBX-D5’s “MIDI IN”
connector, and the computer’s “MIDI IN” connector to the CBX-D5’s “MIDI OUT”
connector using the MIDI cables.
2) Connect the Atari computer’s “SCSI” connector to the hard disk’s SCSI connector
using the 25-pin D-SUB to 50-way SCSI cable.
3) Connect the other hard disk SCSI connector to one of the CBX-D5’s SCSI
connectors using the 50-way SCSI cable.
4) Insert the CBX-D5’s SCSI terminator into the CBX-D5’s unused SCSI connector.
5) Connect the CBX-D5 to an AC receptacle using the supplied power cable.
6) Connect the Atari computer and its video monitor to an AC receptacle.
Settings
1) Set the CBX-D5 to SCSI ID “5 or 6” using the thumb wheel switch on the rear of the
CBX-D5.
2) Set the CBX-D5’s “TO HOST” switch to “MIDI”.
3) Set the hard disk to SCSI ID “1” (refer to its Operating Manual for details).

Quelle: http://www2.yamaha.co.jp/manual/pdf/emi/english/synth/CBXD5E1.pdf

[cyberish]

I did not try it myself, but people report that the Cubase - Version here does the trick:

http://atari.music.free.fr/main.php?Cubase%20Audio

best, raphael

[guest3186]

Hello, Thank you everyone here for the advice.

I will try what you all have suggested and report back here as to how i go with it.

blaylok

[rian_ata]

In einen anderen Thema habe ich schon einen link zu einem Teil das Handbuch verlinkt auf meine Seite. Es soll laufen auf einem TT:

http://forum.atari-home.de/index.php?topic=2536.msg66533#msg66533

[guest3186]

Hello to all,

Thank you very much for all of the advice given to me by the members of this forum.

I have finally gotten it all working great! Now i am able to use my yamaha CBXD5 with cubase audio without any problems.

Thank you very much,

kind regards,

blaylok

[Lukas Frank]

Hier noch ein LINK aus dem atari-forum.com, angeblich die Version 1.0.2 ...

http://doyeuxyvan.free.fr/cubase/CAFCBXD5/

http://www.atari-forum.com/viewtopic.php?f=33&t=20843#p207215

... es soll mit dem roten Dongle vom Cubase 3 funktionieren !

[guest899]

Hier gibt es die Version 1.1 , wahrscheinlich das letzte Cubase Audio CBX update:
http://atari.music.free.fr/main.php?Cubase